Part Number Hot Search : 
LT425 UPD6134 364721 N54901K 0PQ10 HEF45 CI9050 74VHC1
Product Description
Full Text Search
 

To Download 16TTS12FP Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 16TTS..FP High Voltage Series
Vishay High Power Products
Phase Control SCR TO-220AB FULL-PAK, 16 A
DESCRIPTION/FEATURES
2 (A)
The 16TTS..FP High Voltage Series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with Vishay HPP input diodes, switches and output rectifiers which are available in identical package outlines. Fully isolated package (VINS = 2500 VRMS) is UL E78996 approved This product has been designed and qualified for industrial level.
TO-220AB FULL-PAK
1 (K) (G) 3
PRODUCT SUMMARY
VT at 10 A ITSM VRRM 1.4 V 200 A 800/1200 V
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS Capacitive input filter TA = 55 C, TJ = 125 C, common heatsink of 1 C/W SINGLE-PHASE BRIDGE 13.5 THREE-PHASE BRIDGE 17 UNITS A
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER IT(AV) IRMS VDRM/VRRM ITSM VT dV/dt dI/dt TJ Range 10 A, TJ = 25 C TEST CONDITIONS Sinusoidal waveform VALUES 10 A 16 800/1200 200 1.4 500 150 - 40 to 125 V A V V/s A/s C UNITS
VOLTAGE RATINGS
PART NUMBER VRRM, MAXIMUM PEAK REVERSE VOLTAGE V 800 1200 VDRM, MAXIMUM PEAK DIRECT VOLTAGE V 800 10 16TTS12FP 1200 IRRM/IDRM AT 125 C mA
16TTS08FP
Document Number: 93697 Revision: 19-Jun-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 1
16TTS..FP High Voltage Series
Vishay High Power Products
Phase Control SCR TO-220AB FULL-PAK, 16 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER Maximum average on-state current Maximum RMS on-state current Maximum peak, one-cycle, non-repetitive surge current Maximum I2t for fusing Maximum I2t for fusing Maximum on-state voltage drop On-state slope resistance Threshold voltage Maximum reverse and direct leakage current Holding current Maximum latching current Maximum rate of rise of off-state voltage Maximum rate of rise of turned-on current SYMBOL IT(AV) IRMS ITSM I2 t I2t VTM rt VT(TO) IRM/IDM IH IL dV/dt dI/dt 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied t = 0.1 to 10 ms, no voltage reapplied 10 A, TJ = 25 C TJ = 125 C TJ = 25 C TJ = 125 C TEST CONDITIONS Tc = 95 C, 180 conduction, half sine wave VALUES TYP. MAX. 10 16 170 200 144 200 2000 1.4 24.0 1.1 VR = Rated VRRM/VDRM 200 500 150 V/s A/s 0.5 10 100 mA A2s A2s V m V A UNITS
Anode supply = 6 V, resistive load, initial IT = 1 A 16TTS08FP, 16TTS12FP Anode supply = 6 V, resistive load
TRIGGERING
PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak negative gate voltage SYMBOL PGM PG(AV) + IGM - VGM Anode supply = 6 V, resistive load, TJ = - 10 C Maximum required DC gate current to trigger IGT Anode supply = 6 V, resistive load, TJ = 25 C Anode supply = 6 V, resistive load, TJ = 125 C Anode supply = 6 V, resistive load, TJ = - 10 C Maximum required DC gate voltage to trigger Maximum DC gate voltage not to trigger Maximum DC gate current not to trigger VGT Anode supply = 6 V, resistive load, TJ = 25 C Anode supply = 6 V, resistive load, TJ = 125 C VGD IGD TJ = 125 C, VDRM = Rated value TEST CONDITIONS VALUES 8.0 2.0 1.5 10 90 60 35 3.0 2.0 1.0 0.2 2.0 mA V mA UNITS W A V
SWITCHING
PARAMETER Typical turn-on time Typical reverse recovery time Typical turn-off time SYMBOL tgt trr tq TJ = 25 C TJ = 125 C TEST CONDITIONS VALUES 0.9 4 110 s UNITS
www.vishay.com 2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93697 Revision: 19-Jun-08
16TTS..FP High Voltage Series
Phase Control SCR Vishay High Power Products TO-220AB FULL-PAK, 16 A
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, junction to ambient Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-220AB FULL-PAK (94/V0) SYMBOL TJ, TStg RthJC RthJA RthCS Mounting surface, smooth and greased DC operation TEST CONDITIONS VALUES - 40 to 125 1.5 62 1.5 2 0.07 6 (5) 12 (10) g oz. kgf * cm (lbf * in) C/W UNITS C
Mounting torque
Marking device
16TTS08FP 16TTS12FP
Document Number: 93697 Revision: 19-Jun-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 3
16TTS..FP High Voltage Series
Vishay High Power Products
Maximum Allowable Case T emperature (C) 130
Phase Control SCR TO-220AB FULL-PAK, 16 A
Maximum Average On-state Power Loss (W) 25 DC 180 120 90 60 30
16T S T ..FP S eries RthJC (DC) = 1.5 C/ W
120
20
110
Conduction Angle
15
100 30 60 90 90 120 180 80 0 2 4 6 8 10 12 Average On-state Current (A)
MS 10 R Limit
Conduction Period
5
16T S P S T ..F eries TJ = 125C 0 4 8 12 16
0 Average On-state Current (A)
Fig. 1 - Current Rating Characteristics
Fig. 4 - On-State Power Loss Characteristics
Maximum Allowable Case T emperature (C)
Peak Half S Wa ve On-state Current (A) ine
130
16T S T ..FP S eries RthJC (DC) = 1.5 C/ W
180
At Any Rated Load Condition And With Rated V RRM Applied Following S urge.
120
160
Initia l TJ= 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
110
Conduction Period
140
100 30 90 60 90 120 180 80 0 2 4 6 8 10 12 14 16 18 Average On-state Current (A) DC
120
100 16T S T ..FP S eries 80 1 10 100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 2 - Current Rating Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
Maximum Average On-state Power Loss (W)
Peak Half S Wave Forward Current (A) ine
18 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 Average On-state Current (A)
Conduction Angle
200 180 160 140 120 100
180 120 90 60 30 RMSLimit
Maximum Non R epetitive S urge Current Versus Pulse T rain Duration.
Initial TJ= 125C No Vo ltag e Reapp lied Rated VRRM Reapp lied
16T S T ..FP S eries TJ= 125C
16T S P S T ..F eries
80 0.01
0.1 Pulse T rain Duration (s)
1
Fig. 3 - On-State Power Loss Characteristics
Fig. 6 - Maximum Non-Repetitive Surge Current
www.vishay.com 4
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93697 Revision: 19-Jun-08
16TTS..FP High Voltage Series
Phase Control SCR Vishay High Power Products TO-220AB FULL-PAK, 16 A
1000 16T S T ..FP S eries Instantaneous On-state Current (A)
100
10 TJ= 25C TJ= 125C 1 0 1 2 3 4 5 Instantaneous On-state Voltage (V)
Fig. 7 - On-State Voltage Drop Characteristics
Transient T hermal Impedance Z thJC (C/ W)
10 S teady S tate Value (DC Operation) 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08
0.1 S ingle Pulse 16T S T ..FP S eries
0.01 0.0001
0.001
0.01
0.1
1
10
S quare Wave Pulse Duration (s)
Fig. 8 - Thermal impedance ZthJC Characteristics
100 Instantaneous Gate Voltage (V)
Recta ngula r ga te p ulse a)Recommend ed loa d line for ra ted d i/ dt: 10 V, 20 ohms tr = 0.5 s, tp >= 6 s b )Recommend ed load line for <= 30% rated d i/ dt: 10 V, 65 ohms 10 tr = 1 s, tp >= 6 s
(1) PGM = 40 , tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms
(a)
(b)
T = -10 C J T = 25 C J
T = 125 C J
1 VGD
IGD
(4) (3)
(2)
(1)
0.1 0.001
16T S..FP S T eries 0.01 0.1 1
Frequency Limited by PG(AV) 10 100
Instantaneous Gate Current (A)
Fig. 9 - Gate Characteristics
Document Number: 93697 Revision: 19-Jun-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 5
16TTS..FP High Voltage Series
Vishay High Power Products
Phase Control SCR TO-220AB FULL-PAK, 16 A
ORDERING INFORMATION TABLE
Device code
16
1
1 2 3 4 5 6 7
T
2 -
T
3
S
4
12
5
FP
6
7
Current rating, RMS value Circuit configuration: T = Single thyristor Package: T = TO-220AB Type of silicon: S = Converter grade Voltage code x 100 = VRRM FULL-PAK None = Standard production PbF = Lead (Pb)-free 08 = 800 V 12 = 1200 V
Note: For higher voltage up to 1600 V contact factory
LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95072 http://www.vishay.com/doc?95069
www.vishay.com 6
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93697 Revision: 19-Jun-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1


▲Up To Search▲   

 
Price & Availability of 16TTS12FP

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X